User's Guide

67
RDX 8000
Figure 43 — Display
Test Results
Once all six display conditions have been verified confirm completion of a
successful test by selecting “Test Passed”
button which will create a “Display
Test passed” status.
Fan Test
Figure 44 —
Fan Test
To execute the
Fan Test select the “Start Test” button. The fan will cycle through four operation speeds while
monitoring the fan RPM for the correct reference value.
Figure 45 —
Fan Test Results
Once the fan test has completed the
RDX 8000 will report a pass/fail status and the user may click the “OK” button to
log the
result.
Cartridge
Access Test
The Cartridge
Access Test checks the ability of each slot to properly insert/load, identify/communicate with RDX
media, and unload/eject RDX media. The unit will be taken offline from the iSCSI connection to prevent concurrent
data access attempts from the host system. Also at the start of the test all currently inserted
RDX media will be bulk
ejected from
the unit. It is suggested the test operator use a known good cartridge which can be used to test each
slot.