User's Guide

ManualsBrandsQuantum ManualsStorageQuantum RDX8000

RDX 8000

5.11.4 Network

settings

The

"CONFIGURE/Network"

tab allows the user to configure the

parameters

for the network interface.

Figure 26-RDX 8000 Configure Ethernet

MTU Size:

The

Maximum

Transmission

Unit

(MTU)

Siz

controls the maximum data

packet

size

or frame size over the

network.

The

choices

are

1500 (standard frame) and

9000

–

1500 (jumbo frame) is

the default size.

Stack:

The Stack selects th

version

of the

Internet protocol the

RDX 8000

will use

when

communicating on the network. Current

selectio

option and default

choice

PV4.

Method:

The Method will select the IP addressing mode the

RDX

8000 will use. The two options are

DHCP

or Manual. The

8000 default configuration is DHCP.

•

DHCP

– the

RDX

8000 will

seek

out the

DHCP-sever

on your network and automatically obtain an IP address

from

the server each time it powers

up.

• Manual – The

RDX

8000 will use the IP address and other network parameters set on this page for

network

communication.