User's Guide

RDX 8000

5.9.4 Network Status Page

This section depicts the Monitor Network Status page and describes each field on the page.

Figure 17 —

RDX

8000 Monitor Network Status

IP Address:

This field displays the primary IP address of the

RDX

8000.

Bonding Mode:

This field displays the active bonding mode of the

RDX

8000.

MAC Address:

This field displays the main hardware Media

Access

Control address for the unit. The

MAC

address is a

worldwide

unique address

assigned

to the unit. The

MAC

address is embedded in the unit and is not changeable by the

customer.

Link State:

This field displays the current status of the network connection; Up indicates a network connection is established.

Down indicates either no network connection or a failed network connection.

Link Speed:

This field indicates the current network connection speed for the link. To achieve maximum performance the

RDX

8000 should to be connected to the network via a 1 GB/s connection.

Duplex:

This field indicates full duplex or half duplex network connection. Most networks support full duplex

communications.