User's Guide
21
RDX 8000
5.3.2
OCP
Icons
The
RDX
8000 makes use of graphic icons to indicate some conditions to the user.
These
icons are used both on
the
local
OCP
display and in the Active
System
Graphic in the
RDX
8000. The
RDX
8000 icons in use are shown in the
table
below.
Group
Icon
Meaning
OCP
Navigation
Step to next bay/cartridge
info
Pause
at current screen
Cartridge Format
Disk standard format on
cartridge
Tape
format on cartridge (tape
emulation)
Cartridge Status
Write to cartridge prevented (Write
Protect)
Eject
of cartridge prevented (Prevent
Set)
Cartridge Metrics
(RDX
8000)
T
emperature
Number of insertion cycles
Accumulated operational
time
Cartridge
Status
(OCP
only)
Cartridge status not OK
Cartridge status OK
Slot
Empty
No cartridge
inserted
Table 4 — Icon Table
5.3.3
OCP
Navigation
The
RDX
8000
OCP
supports the viewing option of pausing the display at any individual screen and manually
stepping through
screens.
The
OCP
navigation operates as
follows:
• To pause the (currently cycling) display press and hold the
OCP
Navigation button for approximately 3 seconds.
• The
OCP
will change to
Pause
mode indicated by the
OCP
Navigation icon changing to the step icon.
• To step the
OCP
display to the next screen (when the
OCP
is in pause mode) press and release (short
button
press) the
OCP
Navigation button.
Y
ou
may repeat this operation to step through the
OCP
screen rotation
until
you reach the desired screen.
• To resume the normal
OCP
automatic cycling press and hold the
OCP
Navigation button for approximately
three
seconds.
The
OCP
Navigation will resume the auto rotation mode indicated by the
OCP
icon changing to
the
pause icon.
• When in display rotation the
RDX
8000
OCP
automatically
cycles
through the nine
information
display screens
unless there is a pending error condition. Any pending error will
cause
a local alerting condition, indicated by a
text
message
in display with a flashing amber backlight.
• If there is a current error the error
message
may be acknowledged/cleared by pushing and releasing the OCP
Navigation button. Errors may also be cleared remotely in the
RDX
8000
interface.
• Multiple errors will queue so it may be
necessary
to push the
OCP
Navigation button multiple times to clear
errors.
Each
push will update any pending error
message
to indicate the condition which triggered the
error.