User's Guide

ManualsBrandsQuantum ManualsStorageQuantum RDX8000

RDX 8000

4.3 Installing cables and connections

DANGER

High voltage

Risk

of electric shock

• Do not remove cover. No user-serviceable parts are inside.

• Refer servicing to qualified service personnel.

WARNING

Usage

of unapproved power cords

Risk

of personal

injury

Risk

of damage to devices

Before connecting a power cord to the

unit:

•

Ensure

that the power cord meets individual country specific safety

requirements.

•

Use

a sufficient conductor amp capacity to avoid overheating the

unit.

The manufacturer disclaims all liability in the event a non-

manufacturer approved power cord is used.

To connect the power cord to the

unit:

1. Plug the power cord into the power connector

(AC

connector) on the rear panel of the power supply;

see

section

Rear

panel,

2. Plug the power cord into an appropriate electrical

outlet.

To connect the network cable:

The connection to the Ethernet network is via an industry stand

RJ45

copper interface on the rear panel of the unit;

see section

Rear

panel.

1. Insert the Ethernet cable into the Ethernet port #1 of the unit.

2. When the plug is in the full seated position, a positive click should be heard.