User's Guide

Chapter 2: vmPRO Setup and Configuration
NASTargets and File Sharing Protocols
Quantum vmPRO User’s Guide 45
Figure43:CIFS General Configuration Page
WorkGroup Authentication
Configure Workgroup Authentication for your CIFS protocol to authorize user access based on credentials
1
defined in the ConfigureUser dialog box. When you add users to a work group created for the
CIFS protocol, you authorize them to access the exported data on the CIFS share.
ConfigureWorkgroupAuthenticationforaCIFSprotocol
1. On the ConfigureCIFS dialog box or CIFSGeneralConfiguration page, select the EnableCIFS
access check box, as needed.
2. In the AuthenticationMethod drop-down list, select Workgroup.
3. In the Workgroupname field, edit the work group name, as needed.
1
User name and password