User's Guide

Chapter 5: vmPRO Data Recovery
iSCSI Export and Recovery
Quantum vmPRO User’s Guide 199
5. Click Advanced to display the AdvancedSettings dialog box.
Figure156:Advanced Settings Dialog Box
6. Connect to the iSCSI target from the vmPRO appliance:
a. Select the EnableCHAPlogon check box to encrypt the password needed to access the target.
b. In the Name field, enter the user name created for the vmPRO iSCSI user. See the "Prerequisites"
section of About iSCSI Export and Recovery.
c. In the Targetsecret field, enter the password assigned to the vmPRO iSCSI user.
d. Click OK to save changes and exit the dialog box.
7. In the ConnectToTarget dialog box, click OK to display an AutoPlay dialog box, which you can use
to access your mounted VMDK.