User's Guide

Chapter 5: vmPRO Data Recovery
Preparing for Exchange Recovery
Quantum vmPRO User’s Guide 192
4. Click the Discovery tab, and select the vmPRO target portal.
Figure149:iSCSI Initiator Properties Dialog Box – Discovery Tab
5. Click Remove to remove the vmPRO target portal from the iSCSI Initiator.
Remove the iSCSI Target
As your final clean up step, you need to access your vmPRO GUI to remove the iSCSI target from your
vmPRO appliance.
RemovetheiSCSItargetfromyourvmPROappliance:
1. Display the vmPRO GUI.
2. From the SmartMotionBackup menu, select iSCSITargets to display the iSCSITargets dialog
box.