Release Notes

Known Issues
Quantum vmPRO Release Notes 18
ID Description Workaround/Resolution
3194 NetBackup ignores CBT changes on CBT-
enabled VMs. During the backup of a CBT-
enabled VM, the vmPRO appliance only
backs up the default 4 KB file, and ignores the
actual changes to the pancbt.vmdk file.
Resolve the issue
a. Enable BUSY_FILE_ACTION on the
NetBackup client, and set the repeat (retry)
count to 8
1
.
b. Create a User Backup schedule with active
execution window in the backup policy for the
NetBackup client.
c. Copy bpend_notify_busy script from the
master server
(/opt/openv/netbackup/bin/goodies) to the
NetBackup client (/usr/openv/netbackup/bin)
as bpend_notify.
d. Delete the stale actions file in
the/usr/openv/netbackup/busy_files/actions
directory to allow a new actions file to be
created. The actions file should contain the
action that is expected of the BUSY_FILE_
ACTION setting.
3009 The following CBT error occurs:
Changed Block Tracking is only available
on virtual machines starting with HW 7.
This error message is used to show that the
VM property
capability.changeTrackingSupported is
not present or is set to false.
If a user sees this error message and the affected
VM is at Hardware Version 7 (HW 7), you may need
to restart the vCenter or ESX server hosting the VM
to clear this message.
2653
2654
3058
2762
Beginning with vmPRO version 2.2.0, the
vmPRO appliance and the vCenter or ESX
server(s) must be set to the same time zone.
Set the vmPRO appliance and the vCenter or ESX
server(s) to the same time zone for vmPRO versions
2.2 and greater.
2356 Quantum vmPRO does not support vCenter
versions below vCenter 4.0 update 2. A
vCenter bug that causes an internal server
error during backup is resolved as of vCenter
4.0 update 2.
See the online support article: vCenter Server Error.
1
You can also set the retry count to 4 or some other number.