User's Manual

Chapter 4 Configuring StorNext
Windows Configuration Utilities
StorNext 3.1.3 Installation Guide 77
user to a user ID and group on the SAN. (Changes are applied when you
click
Apply. You do not need to restart the client system.)
Use the Authentication tab (figure 39) to specify an authentication
method. Table 16 describes the fields on the Authentication tab.
Figure 39 Client Configuration:
Authentication
Table 16 Client Configuration:
Authentication
Note: If your StorNext installation is Windows-only and you do not
plan to add non-Windows clients, you do not need to specify
an authentication method.
Field / Button Description
Windows User
Select the Windows user to map to a user ID
and group on the SAN.