User's Manual

Chapter 4 Configuring StorNext
Configuring a Distributed LAN Client Server
StorNext 3.1.3 Installation Guide 71
Creating an Override Configuration 4
By default, the settings specified in the dpserver configuration file are
used for all file systems mounted by the distributed LAN server. To use
different settings for a file system, create an override configuration file for
that file system. At the command prompt, type:
./sndpscfg -E <file system>
where <file system> is the name of the file system to which the override
settings apply. Edit the configuration file, and then save and exit. A new
configuration file with the name
dpserver.<file system> is created in the
/user/cvfs/config/ directory.
Using Distributed LAN Client and Server Commands 4
Use the cvadmin commands described in Table 13 to see information
about distributed LAN servers and clients. (For more information about
using
cvadmin commands, see the CLI Reference Guide.)
Table 13 Distributed LAN
Client and Server Commands
Command Description
proxy
Lists all distributed LAN servers for the
currently selected file system.
proxy long
Lists all distributed LAN servers for the
currently selected file system, as well as
tunable parameters and attached disks.
proxy who <distributed LAN
client>
Lists distributed LAN servers connected
to the specified distributed LAN client, as
well as current I/O statistics.
proxy who <distributed LAN
server>
Lists distributed LAN clients connected to
the specified distributed LAN server, as
well as current I/O statistics.