User's Manual

Chapter 4 Configuring StorNext
Configuration Wizard
StorNext 3.1.3 Installation Guide 65
To display the Add New File System Wizard at any time, on the Config
menu, click
Add File System. For more information about adding file
systems, see Chapter 6, “Managing the File System,” in the StorNext
User’s Guide.
Step 3: Add Library 4
The Add Library wizard guides you through the steps of adding and
configuring a tape library or vault. The wizard lets you specify the type of
library (SCSI, ACSLS, DAS, or vault) and set the appropriate parameters
for that library type.
To display the Add Library Wizard at any time, on the Config menu, click
Add Library. For more information about adding libraries, see Chapter 7,
“Managing Libraries,” in the StorNext User’s Guide.
Step 4: Add Tape Drive 4
The Add Drive Wizard guides you through the steps of adding and
configuring tape drives. The wizard lets you associate hardware devices
with libraries and, if necessary, map them to slots.
To display the Add Drive Wizard at any time, on the Config menu, click
Add Tape Drive. For more information about adding tape drives, see
Chapter 8, “Managing Drives and Disks,” in the StorNext User’s Guide.
Step 5: Add Media 4
The Add Media Wizard guides you through the steps of adding media to
a configured library. The wizard lets you specify a media type and, for
vaults, specify media IDs. (Before adding media, make sure no tape
drives contain media.)
To display the Add Media Wizard at any time, on the Config menu, click
Add Media. For more information about adding media, see Chapter 9,
“Managing Media,” in the StorNext User’s Guide.