User's Manual

StorNext 3.1.3 Installation Guide 112
Appendix B
BStorNext Administration
Tasks
Use the following information to perform specific file system
configuration tasks that do not apply to a typical StorNext set up.
Sharing a Library Between Applications
If two or more software applications (on one or multiple machines), are
configured to use the same library, then you must use the following
procedure to enable the library to be shared and to prevent media being
overwritten when these applications are used. This task must be
performed when the Configuration Wizard (CW) is run during initial
StorNext setup and configuration. For more information on using the
CW, refer to the StorNext Installation Guide.
You must have root privileges to perform this task.
Note: For library sharing to be effective, the steps in the following
procedure must be performed in the order in which they are
presented.