User's Manual

Chapter 4 Configuring StorNext
Windows Configuration Utilities
StorNext 3.1.3 Installation Guide 98
Figure 52 Configuration
Administrator
On the Configuration Administrator window, do one of the following:
•Click New to create a new configuration file.
•Click Modify to edit an existing configuration file. Browse for the
configuration (
*.cfg) file and click Open.
•Click Exit to close the Configuration Administrator window.
When you create a new configuration file or open an existing
configuration file for editing, the StorNext File System Configuration
window appears. This window includes four tabs:
• Global Settings on page 99
• Disk Types on page 101
• Disk Definitions on page 103
• Stripe Groups on page 105
Click a tab to view or modify StorNext File System properties. After
making changes on one or more tabs, click
OK to save the changes.
Specify a name and a location for the
*.cfg file, and then click Save.
Note: Before configuring a file system, you should label disk devices.
For more information, see
Disk Device Labeler on page 83.