User's Manual

Chapter 4 Configuring StorNext
Windows Configuration Utilities
StorNext 3.1.3 Installation Guide 85
Labeling Disks 4
When you select one or more disks and click Label, a confirmation screen
appears asking if you are sure you want to proceed. Click
OK to continue.
The
Disk Labeler dialog box appears (figure 45). Table 18 describes the
fields on the on the Disk Labeler dialog box.
Figure 45 Disk Labeler Dialog
Box
Table 18 Disk Labeler Dialog
Box
Field / Button Description
New Disk Label
Type the label for the disk.
New Sectors
(Optional) Type the number of sectors on the
disk.
Create Label
Write the new label to the disk and proceed to
the next selected disk.
Skip Disk
Do not write a label to the disk and proceed to
the next selected disk.
Cancel
Close the Disk Labeler dialog box.