User`s guide

Chapter 4 Functional Description
Create a Protection Plan Page Functions
GoVault™ Data Protection Software, Version 1.0 User’s Guide 70
Create a Protection Plan Page Functions
Clicking the + Add a Protection Plan button on the Home page opens the
Create a Protection Plan page that you can use to create a new protection
plan. Tabs, numbered 1 through 5, indicate proper sequence for creating a
new plan (see figure 53
):
• 1. Start
• 2. Selections
• 3. Plan Name
• 4. Cartridge
• 5. Schedule
Opens a Settings for . . . Plan page for the selected
plan, with the
Selections tab selected. This page is
identical to the
Create a Protection Plan page for
the selected plan, and you can use it to change the
functional settings for the plan (see Create a
Protection Plan Page Functions in the following
subsection).
Displays a
Delete Plan confirmation message
asking if you are sure that you want to remove
the selected protection plan.
Note: After you have created a protection plan, all of the
Create a
Protection Plan
page functions are available as a nearly
identical
Settings for . . . Plan page that you can use to change
the settings for the plan.
Clicking . . . Performs this function . . .