User`s guide

Chapter 3 Operation
Checking Protection Plan Results
GoVault™ Data Protection Software, Version 1.0 User’s Guide 43
2 Answer Yes in response to the Remove Plan Are you sure . . .? prompt
to remove the protection plan.
Checking Protection Plan Results
There are two ways to view the results of a protection plan run. Each
displays a slightly different view of the
Results page that shows the
activity for all of your saved protection plans:
• Clicking the
Results command button in the Home page options
panel displays the
Results page listing all of your saved protection
plans and the number of times they ran (see figure 35
).
As prompted, select/open the protection plan you want to check to
display the
Result Details for the plan (see figure 36 and table 2).
• Clicking either the big green check box or the
Status link on the Home
page
My Saved Protection Plans display that shows the results as
either
OK, Cancelled, Warning or Error for a saved protection plan
displays the
Results page showing the Result Details for the most-
recent run of the plan (see figure 36
and table 2).
Note: Removing a protection plan from the GoVault data
protection software archive environment does not delete
the archived data that was stored on the GoVault cartridge
by the plan. You can still explore and restore the data as
described in Finding and Restoring Files and Folders
on
page 48.