User's Guide

Chapter 3 Operator Commands
Unloading a Drive
70 Quantum P4000 and P7000 Libraries User’s Guide
The Move Cartridges command continues until completed unless
you press the
Abort button to stop the operation.
Unloading a Drive 3
The
Unload Drive command prepares a tape cartridge to be removed from
a drive by rewinding and ejecting the cartridge. After unloading the
drive, remove the tape cartridge using the
Move Cartridges command.
To unload a drive:
1 On the
Operator screen, press the Unload Drive button.
The GUI displays the
Control: Unload Drive screen (see figure 40).
Figure 40 Unload
Drives Screen
2 Use the arrow buttons to highlight the desired drive and then press
Execute.
The GUI displays a
Command In Progress dialog box.
Overview Tapes Operator
Back Forward
Home
O
Control: Unload Drive
System
Off-line
Standby
Load Port
Stop
Execute
Drive 0
About