User's Guide

Chapter 2 Basic Library Operations
Operating the Load Port
54 Quantum P4000 and P7000 Libraries User’s Guide
4 Press the Select button.
A screen appears indicating that the new security level has been set
successfully.
5 Press
Okay.
The lock icon displays the new security level (S, O, U, I, or L).
Operating the Load Port 2
After pressing the
Load Port button on the GUI, the library will release
the lock on the load port (you will hear an audible ‘click’). The GUI
displays “Wait Open Load Port.” Pull on the load port’s handle. The load
port pulls outward about an inch to its unlocked position which allows its
interior drum to be rotated 180
o
for magazine loading or unloading.
Note: This procedure is especially useful to change from
Operator or Service levels to the User level after executing
an Operator or Service level command.
Note: If the GUI is accessed from the Service (S) or Operator (O)
level, and no activity has occurred for 15 minutes, the GUI
will return to the initial screen (see figure 24
).
Warning: Opening or closing the load port door presents mechanical
hazards. Use both hands to pull or push the load port
finger grip and use the top and bottom surfaces of the load
port drum to keep fingers out of load port openings when
rotating the load port drum (see figure 31
).