Instruction Manual

Quantum ATL 4000 Library Unpacking Instructions
Document 6434005-02, Ver. 2, Rel. 0
August 2002
24 Unpacking the Library
Figure 25 Storing the
Shipping Restraints
2 Slide the two ramp extensions into their shipping position on top
of the pallet.
3 Secure the ramp extensions with the foam block.
4 Re-insert the wooden bar into its brackets on the pallet.
5 Fold the shipping bag.
6 Place the shipping bag, load port shipping plate, stop blocks, foam
cap, screws, and other packaging materials on the pallet.
7 Collapse the cardboard box.
8 Place the cardboard box on top of the packaging materials on the
pallet.
9 Secure the pallet, packaging materials, and cardboard box for
future use.
Leveling the Library 0
To level the library:
1 Rotate each foot of the library until it makes contact with the floor.
2 Rotate each foot an additional 1/4 turn clockwise with the open-
end wrench to begin raising the library.
3 Center a carpenter’s level on the top front edge of the library.
4 Check the gauge on the level. If the front of the library is level,
proceed to step 6
. If it is not level:
Label with shipping
restraints outlined