User's Guide

Chapter 3 Operator Commands
Unloading the Load Port
54 Quantum|ATL P3000 Series User’s Guide
To unload the load port:
1
On the Operator screen, press the Unload Imp/Exp button.
The GUI displays a Command In Progress dialog box is
displayed.
2
If it becomes necessary to stop the Unload command, press the
Abort button
Note:
You can also use the Move Cartridge command to
unload the load port. The Move Cartridge command is
especially useful if the destination of the move is
important. For more information about the Move
Cartridge command, see Moving Cartridges
on page 50.”
Note:
The inventory process is also stopped if an error is
detected. In this case, the GUI displays an error
message.