User's Guide

Chapter 3 Operator Commands
Unloading a Drive
52 Quantum|ATL P3000 Series User’s Guide
b
Using the keypad, enter the address of the destination
element and then press the Execute button. The destination
information is displayed in the Destination text box and the
move is initiated.
The GUI displays a Command In Progress dialog box with an
Abort button.
The Move Cartridges command continues until completed
unless you press the Abort button to stop the operation.
Unloading a Drive
3
The Unload Drive command prepares a tape cartridge to be
removed from a drive by rewinding and ejecting the cartridge.
After unloading the drive, remove the tape cartridge using the
Move Cartridges command.
To unload a drive:
1
On the Operator screen, press the Unload Drive button.
The GUI displays the Control: Unload Drive screen (see
figure 28
).