User's Guide

Chapter 2 Basic Library Operations
Changing the GUI Security Levels
Quantum|ATL P3000 Series User’s Guide 35
Figure 18 Password
Screen
3
Enter a password if necessary.
A password is required to enter a higher security level than the
current level.
4
Press the Select button.
A screen appears indicating that the new security level has
been set successfully.
5
Press Okay.
The lock icon displays the new security level (S, O, U, I, or L).
Note:
This procedure is especially useful to change from
Operator or Service levels to the User level after
executing an Operator or Service level command.
Note:
If the GUI is accessed from the Service (S) or
Operator (O) level, and no activity has occurred for
15 minutes, the GUI will return to the initial screen
(see figure 12
).
System
Off-line
Standby
Load Port
Back Forward
Home
O
Enter Password
Enter
9 0
7 8
5 6
3 4
1 2
Enter Password: _
Stop
Service Tapes Operator
About
Quantum|ATL