User's Guide

Appendix B Relocating the Library
Preparing the Library for Relocation
90 Quantum|ATL P3000 Series User’s Guide
a
Move the vertical carriage assembly to the right hand end
of the horizontal axis.
b
Place the horizontal carriage restraint and install the screw
that secures it to the floor of the library.
c
Install the two screws that secure the horizontal carriage
restraint to the horizontal carriage assembly.
Figure 44 Installing
the Horizontal
Carriage Restraint
6
Install the gripper restraint:
a
Slide the gripper assembly away from the vertical axis until
the gripper assembly is fully extended and the gripper
restraint disengages from the follower guide.
b
Pivot the gripper restraint into place until it interlocks with
the motor, spring post, and follower guide (see figure 45
).
The gripper restraint should now be parallel to the follower
guide.
c
Slide the gripper assembly and gripper restraint toward the
vertical axis (see figure 46
and figure 47).
Horizontal
carriage
restraint