User Manual

Operation
Quantum:EV OpenCharge EVQROCM-01-V03-R0 Installation and Operation Manual
Page 19 of 25 January 2022
Operation
NOTE: At the end of a charging session, always disconnect the cable from the vehicle
before disconnecting from the charger.
Operating instructions for this charger are shown on the unit fascia. For more detail, refer
to the EV Driver App User Guide included within the charger packaging.
VendElectric EV Driver Application
The VendElectric EV Driver Application is a free download for use with smartphones
running Google Android or Apple IOS. The application may be downloaded from Google
Play or the Apple App Store.
Alternatively, the application can be used via a web browser.
x https://app.vendelectric.com
For operation of the system using the online application, please refer to the EV Driver App
User Guide included within the charger packaging.
Status Indicator Guide
Flashing blue light Socket Available.
Flashing green light
Socket Available for ‘Plug and Go’ charging
(optional feature to be activated by the Host).
Fixed blue light Cable plugged in but not charging.
Fixed green light Charge in progress.
Fixed red light Potential earth leak fault detected by the 6mA DC device.
Flashing red light Potential Communications Fault.
No light
No power to the unit or the breaker within the unit has
tripped and needs to be reset.
1. Make sure the status indicator shows that the unit is ready to charge.
2. Connect the charging cable to the charger.
3. Connect the other end of the cable to the vehicle
4. Use the mobile application to start the charge session.
5. Alternatively use an RFID card/fob to start the charge session.
x The charger will issue a ‘beep’ sound to indicate the card has been recognised
and accepted.
6. Make sure the status indicator changes to a fixed green light.