Instruction Manual

Quantum ATL M2500 Unpacking Instructions
Document 6423000-04 A01
May 2003
18 Removing the Remaining Packing Materials
11 If the library will be installed in a rack with a StackLink
mechanism, remove the StackLink cover plate from the library.
a Insert a flat blade screwdriver into the horizontal Z movement
slot and turn the screw counterclockwise to raise the Z
tray to
level 1 (see
figure 18).
Figure 18 Raising the
Z
Tray
Caution: Do not remove the StackLink cover plate if the
library will be used as a stand-alone unit.
Caution: Do not raise the Z tray manually; this can result in a
belt jump.
Horizontal Z movement slot