User's Guide

Troubleshooting and Diagnostics 45
After you insert the scratch cartridge, the front panel indicators display the following:
Indicator State, Character, or Message
Status LED
Amber, solid
Single-character display
h, flashing
LCD
Test Head
Tape Loading ====
while the drive loads the scratch tape, followed by:
Test Head
Writing ====
The drive takes approximately 10 minutes to run the tests.
If no error is detected, the test will loop and begin again.
4. Press the Unload button. The LTO standalone rewinds and unloads the scratch tape. The front panel indicators display the
following, and the LTO standalone exits Maintenance Mode:
Indicator State, Character, or Message
Status LED
Amber, flashing
Single-character display
0
LCD
Test Head
Tape Unloading
If an error is detected, the front panel indicators display the following:
Indicator State, Character, or Message
Status LED
Amber, flashing
Single-character
display
5
LCD
Error!
Drive Problem
And your LTO standalone will exit Maintenance Mode.
To resolve the error, refer to the following Error Code table.