User's Guide

Chapter 3 Basic Library Operations
SCSI ID
Quantum|ATL PowerStor L500 Series Tape Library User’s Guide 49
7
Press
SELECT
to return to the main menu.
SCSI ID
3
The
SCSI ID?
option displays the SCSI ID for all devices and
allows existing SCSI IDs to be changed.
Make sure all devices on the same SCSI bus have different SCSI ID
assignments. SCSI ID defaults are as follows:
• Drive 2 = SCSI ID 3
• Drive 0 = SCSI ID 1
• Drive 1 = SCSI ID 2
• Library controller = SCSI ID 0
Table 7
lists possible SCSI ID options and their respective
messages.
Note:
When changing a SCSI ID, wait at least 30 seconds before
checking the ID. The CHM may not show the changed
ID until the tape drive has been reset.