User's Guide

Chapter 3 Basic Library Operations
OCP Functions
Quantum|ATL PowerStor L500 Series Tape Library User’s Guide 35
Table 3 OCP LCD
Menu Structure
OCP Main Menu OCP Submenus
STATUS?
•
Library Init/Active/Idle
(at POST)
•
Slot Status 0-13
(displays status of all
slots)
•
Drv 0, Drv 1, Drv 2
(displays tape
drive status)
EJECT/UNLOCK?
(Pre-v34
firmware)
•
Eject Cartridge?
unloads cartridge
from a drive
•
Eject Drive?
ejects cartridge from each
drive and returns it to its respective slot (if
a drive has a cartridge in it)
•
Unlock Door?
unlocks the door after the
tape is ejected from each drive and
returned to its respective magazine slot)
EJECT/UNLOCK?
(v34+ firmware)
•
Eject Cartridge?
unloads cartridge
from drive if cartridge is present. If
cartridge is not present,
Drive is Empty
is displayed.
•
Eject Drive?
ejects
the cartridge from
the drive and returns it to its slot (if the
drive is loaded and
Mode/
SetUnloadCart
is enabled)
•
Unlock Door
unlocks the door either
after the cartridge is ejected from the drive
(if Mode/SetUnloadCart is enabled), or
without ejecting the cartridge from the
drive (if Mode/SetUnloadCart is disabled)
LOAD?
•
Load Slot # To Drive #?
loads
cartridge from selected slot
•
From Slot #
(loads cartridge from
selected slot)