User's Guide

88 Quantum|ATL PowerStor L500 Series Tape Library User’s Guide
92H Retry
command
Timed-out opening drive handle during
cartridge unloads.
The library controller determines if the
drive is still in unloaded state after
receiving this error code. If the drive is
still in the unloaded state, then reissuing
the command can retry the command. If
the drive is not still in the unloaded
state, then another unload command
must be issued to the drive prior to
retrying this command.
93H Reissue
command
for retry
Timed-out attempting to find the pusher
home position during a cartridge
unload.
94H Reissue
command
for retry
Timed-out while moving a cartridge
from the drive onto the CHM. If this
error occurs, the loader controller will
try to move the cartridge back into the
drive.
Note that receipt of this error code
implies the cartridge has been put back
into the drive.
95H Retry
command
Timed-out while moving the CHM from
the drive load position to the slot
position during a cartridge unloads.
The command can be retried by issuing
a SCAN MAGAZINE command
followed by reissuing the UNLOAD
command.
96H Reissue
command
for retry
Timed-out finding PUSHPOS 1 during a
cartridge unload.
Error Code Error Type Description