Instruction Manual

Document 6321102-01, Ver. 1 Rev. 0

August 1998

Unpacking the Library 7

Unpacking the Library

The unpacking instructions vary depending upon whether you

received a stand-alone or rack-mount library. If you received a stand-

alone library, you should have only one shipping carton. Follow the

instructions in “Uncrating the Library” on page 8 to unpack the

library.

If you received the rack-mount library, you should have two shipping

cartons. The large carton contains the library, and the smaller carton

contains the rack-mount kit.

To unpack and install the rack-mount library, you must:

‡ Uncrate the rack-mount kit and verify its contents (see “Uncrating

the Rack-Mount Kit”)

‡ Install the rack-mount kit in the rack (see “Installing the

Rack-Mount Kit”)

‡ Uncrate the library and place it in the rack (see “Uncrating the

Library” on page 8)

Uncrating the

Rack-Mount Kit

Cut the packing tape at the top of the shipping carton and unpack the

rack-mount kit. Before installing the rack-mount kit in the rack,

compare the contents of the carton with the packing list inside the

shipping carton.

Installing the

Rack-Mount Kit

Install the rack-mount kit in the rack, referring to drawing provided in

the shipping carton.