User's Guide

60 Specifications
Environment
Table 22 provides the environmental requirements necessary to operate your autoloader.
Tape Drive
Table 23 provides the requirements necessary to operate your autoloader configured with an SDLT-600
tape drive.
Number of slots 8
MTBF 250,000 hours
Interface LVD Ultra SCSI, 68-pin HD connector
Table 22 Environmental Specifications
Characteristic Specification
Temperature
Operating 10º to 40ºC (50º to 104ºF)
Non-operating -40º to 66ºC (-40º to 151ºF)
Recommended operating temperature 20º to 30º C (68º to 86º F)
Temperature shock immunity - maximum rate of
change
10º C per hour (50º F)
Humidity
Operating 20% to 80% RH non-condensing
Non-operating 10% to 95% RH non-condensing
Altitude
Operating -152.4 to 9144m (-500 to 30,000 ft)
Table 23 SDLT-600 Tape Drive Specifications
Description SDLT-600
Read/write transfer rate: maximum sustained Non-compressed mode:36 MBps
Compressed (2:1 typical): 72 MBps
Burst transfer rate 160 MBps
Average access time 79 seconds
Loading time to BOT (for previously written
tape)
12 seconds
Table 21 SDLT-600 Autoloader Specifications
Characteristic Specification