User's Guide

FastStor 2 User’s Guide 53
A4H Door function error Slider door in front bezel not in the requested position
during device operation.
A5H Fan Error Autoloader processor detected a fan error.
Table 15 Electronic Hardware Error Codes
Error Code Description Details
B0H ROM error Cycle power on the autoloader and attempt the
operation again. If the error recurs, contact your
service representative (refer to Getting Help
on page
58).
B1H RAM error. Cycle power on the autoloader and attempt the
operation again. If the error recurs, contact your
service representative (refer to Getting Help
on page
58).
B2H NVRAM error Cycle power on the autoloader and attempt the
operation again. If the error recurs, contact your
service representative (refer to Getting Help
on page
58).
B5H Display error Cycle power on the autoloader and attempt the
operation again. If the error recurs, contact your
service representative (refer to Getting Help
on page
58).
B6H Memory error Cycle power on the autoloader and attempt the
operation again. If the error recurs, contact your
service representative (refer to Getting Help
on page
58).
B7H Timeout on autoloader
command
Cycle power on the autoloader and attempt the
operation again. If the error recurs, contact your
service representative (refer to Getting Help
on page
58).
B8H Barcode error Use Commands > Re-inventory to perform an
inventory rescan.
If the problem recurs, replace the barcode reader.
B9H Database error Contact your service representative (refer to Getting
Help on page 58).
Table 16 Drive Error Codes
Error Code Description Details
BAH Drive load timeout Cycle power on the autoloader. Verify that the fan is
operational. If the error recurs, contact your service
representative (refer to Getting Help
on page 58).
Table 14 Low Level Axis Error Codes (Continued)