User's Guide

48 Troubleshooting and Diagnostics
Table 5 Not Ready Error Codes
Error Code Details and Description
01H Unit becoming ready by scanning magazines, etc.
02H Manual intervention required.
03H Cause not reportable.
04H Firmware upgrade in process.
05H Front door is open.
06H Working on another SCSI command.
07H Cleaning cartridge installed.
08H Loader is in sequential mode.
09H Loader is offline.
0A-0FH Reserved.
Table 6 Unit Attention Error Codes
Error Code Details and Description
10H Power on or reset occurred.
11H Media may have changed.
12H Media removal prevented.
13H Invalid cartridge.
14H Not ready to transition.
15H Mode parameters changed.
16H Microcode has changed.
17H Door was open and was closed again.
18H SCSI bus type changed to SE.
19H SCSI bus type changed to LVD.
1AH Invalid cleaning cartridge.
1BH Invalid upgrade tape.
1CH Cleaning requested.
1DH-1FH Reserved.
Table 7 Recovered Error Codes
Error Code Details and Description
20H Error log overflow.
21H SCSI parity error.