User's Guide

FastStor 2 User’s Guide 35
Configuring the Real Time Clock
The following parameters can be configured for the real time clock (RTC):
Configuring the Log
The following parameters can be configured for the log:
Configuring Event Notification
The following parameters can be configured for event notification:
OCP access pin code Four digits.
Repeat OCP access pin code This entry must match the previous entry.
Support name
Specify the name that is displayed in the support page as contact
point.
Support phone Specify the phone number to dial in case of a support request.
Support email Specify the email address to contact in case of a support request.
Label Description
Time standard or 24 h & the month or day listed first
Date DD-MM-YYYY
Label Description
Trace Log Mode Error and trace logs can be enabled or disabled through
filtering options. Because the filters apply during log entries in
the database and are not retrieve filters, events that have
been filtered out are permanently unretrievable. Choices are
“off,” “on,” and “stop trace at first error.”
Trace Level Only the service level user can configure the trace level.
Trace Filter Only the service level user can configure the trace filter
options.
Label Description
Notify errors Specify whether or not notifications of errors are to be e-mailed to
users.
Notify warnings
Specify whether or not notifications of warnings are to be e-mailed
to users.
To email address Specify the e-mail address used to which to send notifications of
errors or warnings. Use the format [e-mail]_type.
Email domain The domain name to use. The autoloader itself creates the correct
email address from using this domain name as the from e-mail
address.