User's Guide

FastStor 2 User’s Guide 33
The following pieces of information are displayed for the media:
Using the RMU Configuration Pages
Only administrators and service personnel have access to the RMU Configuration page. The following
parameters can be set by means of the Configuration page:
•Device
•Network
• User
• Real Time Clock
•Log
• Event Notification
• Reset
Configuring the Device
The following parameters can be configured for the device:
Number of load-unload cycles Number of load and unload cycles
Operation time Time since first start.
Current drive status Current status of the drive
Current drive activity Current activity of the drive
Current robotic action Number of retries
Barcode reader enabled Yes or No
Label Description
Slot number The home slot number, 1-8
Status Good, Warning, or Error
In drive The drive number, if any.
Barcode The barcode number
Write-protected Yes or No
CAUTION:
The Configuration pages of the RMU interface present device specific
settings to be selected or specified. Changes take effect only after a
device reset.
NOTE:
The RMU Configuration page functionality is not the same as the functionality
available by means of the operator panel Configuration menu. Refer to
Understanding the Menu Structure
on page 13.
Label Description