User's Guide

32 Using the Remote Management Unit
The following pieces of information are reported for the drive:
Using the RMU Status Pages
These information pages show the general status of the autoloader or the media. These pages are
accessible by all user account levels. No changes can be made by the user.
The following pieces of information are reported for the autoloader:
Bootcode firmware
revision
The build number of the firmware bootcode
Firmware build date The date is displayed in the format MM-DD-YYYY
Number of firmware
updates
The number of times the firmware has been updated
Number of power ups The number of times the autoloader has been powered on
Barcode reader Indicates whether or not the barcode reader functionality has been
enabled
IP address The IP address is displayed in the format xxx.xxx.xxx.xxx
MAC address The media access control number, a unique number for each piece of
hardware
Label Description
Vendor ID The drive vendor’s ID number
Product ID The drive’s product ID number
Serial number The drive’s serial number
Product revision The drive’s product revision number
Firmware revision The drive’s firmware revision number
Data compression Indicates whether or not data compression has been turned on
Interface type SCSI
SCSI ID The drive’s current SCSI ID
Speed Selection The drive’s current speed
Temperature The drive’s current operating temperature
Drive Cooling Request N.A.
Label Description
Status Good, Warning, or Error
Cartridge in operation The number of the cartridge currently in operation
Label Description