Manualshelf

User's Guide

ManualsBrandsQuantum Manualscomputers & electronicsFastStor 2
31323334353637383940
FastStor 2 User’s Guide 27
5 Press CANCEL when done.
Viewing Serial Numbers
At any time, you can display the serial number for the overall product or for the drive.
Displaying the Autoloader Serial Number
This option displays the serial number of the autoloader.
1 Press + or – until Go offline appears. Press ENTER.
2 Press + or – Information appears. Press ENTER to access the available options.
3 Press + or – until Loader Info appears. Press ENTER to access the available options.
4 Press + or – until Serial Number appears. The operator panel displays the serial number.
5 Press CANCEL when done.
Displaying the Drive Serial Number
This option displays the serial number of the drive.
1 Press + or – until Go offline appears. Press ENTER.
2 Press + or – Information appears. Press ENTER to access the available options.
3 Press + or – until Drive Info appears. Press ENTER to access the available options.
4 Press + or – until Serial Number appears. The operator panel displays the serial number.
5 Press CANCEL when done.
Viewing Firmware Levels
At any time, you can display the current versions of firmware for the overall product as well as for the drive.
Displaying Autoloader Firmware Version
This option displays the version of the firmware currently installed on the autoloader.
1 Press + or – until Go offline appears. Press ENTER.
2 Press + or – Information appears.. Press ENTER to access the available options.
3 Press + or – until Loader Info appears. Press ENTER to access the available options.
4 Press + or – until Firmware Rev appears. The operator panel displays the revision of the firmware
currently installed in the autoloader.
5 Press CANCEL when done.
Displaying Drive Firmware Version
This option displays the version of the firmware currently installed on the drive.
1 Press + or – until Go offline appears. Press ENTER.
2 Press + or – Information appears. Press ENTER to access the available options.
3 Press + or – until Drive Info appears. Press ENTER to access the available options.
4 Press + or – until Firmware Rev appears. The operator panel displays the revision of the firmware
currently installed in the autoloader.