User`s guide

Chapter 7 Customer Replaceable Units (CRUs)
Rack Mounting the Autoloader
Quantum SuperLoader 3 User’s Guide 91
Figure 12 Clearance
Requirements for Rack
Mounting
Minimum clearance to
load or unload a magazine
from the system
Minimum clearance to load a tape
via the mailslot
Clearance to door inside a rack
27.0” [686 mm]
6.0” [152 mm]
2.0” [51 mm]
1.0” [25 mm]
3.4” [86 mm]
Minimum side
clearance (both
sides)
FRONT
REAR
Minimum clearance
between the rear of the
SuperLoader and the
inside of the rack (using
standard mounting
brackets adjusted to their
closest setting)