User's Guide

Chapter 3 DX3000 and DX5000 Remote Management
System Status
Quantum DX3000 and DX5000 User’s Guide 69
Viewing Virtual Disk Status 3 The DX3000/DX5000 system provides status information for every
virtual disk within the system.
To view the hardware status:
1 From the System Status page, click the Virtual Disks tab to view the
hardware status.
The Virtual Disks Status page displays (see figure 44):
Figure 44 Virtual Disk Status
Page
2 The system can display the following logical drive status (see
table 13):
Table 13 Logical Drive Status
Logical Drive Stratus Description
Failed
Two more hard drive have failed within the
logical drive. These drives must be replaced
and then the logical drive recreated.
Degraded
A single hard drive has failed within the
logical drive. Replace the hard drive to
return the logical drive to a
Normal status.