User's Guide

Chapter 3 DX3000 and DX5000 Remote Management
System Status
Quantum DX3000 and DX5000 User’s Guide 64
Select the partition you wish to view from the drop down list. The
Show/Hide links will either display or hide information on the
selected tape drive, tape cartridge, or robot. Clicking on a tape drive,
tape cartridge, or robot displays detailed information about the
selected device.
•Degraded Tape Cartridges - when a logical drive is
degraded, the tape cartridges associated with that
logical drive are shown in a degraded state.
•Unavailable Tape Cartridges - when a logical drive
has failed or is inaccessible due to failure, the tape
cartridges are shown as unavailable.
• Logical View
A logical view displays the partitions within the DX3000/DX5000
system. Clicking on a partition displays the specific details for that
partition on the right hand side of the page.
• Performance View
The performance view displays the throughput performance for each
partition. Clicking on a partition will display the detailed
performance the specific partition.
• Events
The events list displays all events that have occurred on the DX3000/
DX5000 system.
Viewing Tape Drive Details 3 To view the tape drive details:
1 From the System Status page, select the partition from the drop down
list and click the tape drive you wish to view.
The tape drive details displays (see figure 41):