User's Guide

Chapter 3 DX3000 and DX5000 Remote Management
Configuration
Quantum DX3000 and DX5000 User’s Guide 57
the values match, the peer is authenticated. If you want to
authenticate the iSCSI targets with CHAP, select OK and enter a
User Name and Password for the target.
• SRP - Secure Remote Password is a password based authentication
The two peers can be identified using a single password, or there
can be combinations where the client is authenticated using SRP
and the server using a certificate. The advantage of SRP
authentication is that SRP does not require the server to hold the
user's password. The SRP requires a verifier which is calculated
using the user's password. If you want to authenticate the iSCSI
targets with SRP, select OK and enter a
User Name and Password
for the target.
Configuring the Fibre Channel Options 3
The DX3000/DX5000 system allows you to control and configure each of
the Fibre Channel input ports that connect to the customer SAN.
To access the Fibre Channel page (see figure 37):
1 In the Hardware page, click Fibre Channel.
The management frame displays the Fibre Channel Port Settings page (see
figure 37
).