User's Guide

Chapter 3 DX3000 and DX5000 Remote Management
Configuration
Quantum DX3000 and DX5000 User’s Guide 46
4 In the General section, select the port you wish to edit.
5 Edit the host and domain information as desired.
6 Click Apply.
Configuring the Date and
Time
3
The date and time can be set from the DX3000/DX5000 system web
pages. Setting the correct date and time allows the system to provide
accurate reports when events occur on the system.
Configuring the Date and Time 3
To access the Date and Time Configuration page:
1 In the Configuration page, click Date & Time.
The management frame displays the Date & Time Configuration page
(see
figure 30).
Network Mask
View or set the network mask for the DX3000/
DX5000 system
Link Speed &
Duplex
View and set the link speed and duplex for the
DX3000/DX5000 system (10/100/half/full/auto)
Note: If the system has DHCP enabled and cannot receive an IP
address from the DHCP server, the system will reset back
to the default IP address (10.1.1.1 for port 1 and 10.0.1.0 for
port 2). If the port is DHCP enabled, the DHCP server
provides the default gateway, domain name, and DNS IP
address, even though the user has entered values for these
fields.
Field Description