User's Guide

Chapter 3 DX3000 and DX5000 Remote Management
Configuration
Quantum DX3000 and DX5000 User’s Guide 45
Figure 29 Network Configuration
Page
The Network Configuration page contains links to individual Ethernet
port information as well as general network information.
2 Select the Ethernet port (Port 1 and Port 2) and edit the information as
desired (see
table 7 for a description of the fields).
3 Click Apply.
Table 7 Network Configuration
Fields
Note: When DHCP is disabled, the default IP address for port 1
is 10.1.1.1. with a netmask of 255.255.255.0 The default IP
address for port 2 is 10.0.1.0. with a network mask of
255.255.0.0.
Field Description
DHCP
Enable or disable DHCP on the specific DX3000/
DX5000 port (port 1 or port 2).
IP Address
View or set the IP address for the DX3000/
DX5000 system.