User's Guide

Chapter 3 DX3000 and DX5000 Remote Management
Configuration
Quantum DX3000 and DX5000 User’s Guide 41
Figure 26 Enabling/Disabling
Write Protection
Available tape
cartridge list
Write protect
enable/disable
Apply button
2 Select the tape cartridges from the Available Tape Cartridge list and
click the right arrow button to move them into the
Selected Tape
Cartridge
list. You can sort the tape cartridges by barcode, partition,
location, and used. You can show all cartridges, unassigned
cartridges, or by partition assignment.
3 Check Enable Write-Protection Selected Tape(s) to ENABLE write
protection on the selected tape cartridges or un-check the Write-
Protection Select Tape(s) to DISABLE write protection on the selected
tape cartridges.
4 When you have selected the tape(s) and write protection status, click
Apply.
Write protection for the selected tapes is enable/disabled.
Assigning Barcodes 3
Barcode labels provide individual identities for each tape cartridge in the
system. These labels allow the DX3000/DX5000 system and third-party
backup applications to track and differentiate between the tape cartridges
within the system.