User's Guide

Chapter 3 DX-Series Remote Management
System Status
Quantum DX-Series User’s Guide 68
Table 16 Controller Fan and
Power Supply Status
Table 17 Controller Fibre
Channel Ports Details
Fibre Channel Switch Details (DX100 Systems Only) 3
To view the details or status of the Fibre Channel switch, click on the
Fibre Channel switch icon on the Hardware Status screen shown in
figure 43
.
The Fibre Channel Switch screen display (see figure 46
).
Field Description Failed State
Power Supplies Displays the current status of the power supplies. If a
power supply has failed, contact Quantum Customer
Support (see Customer Support
on page xvii).
Fan Modules Displays the current status of the fan modules. If a
fan module has failed, contact Quantum Customer
Support (see Customer Support
on page xvii).
Events Clicking
Events displays all log entries for the DX-Series controller. Have this
information available prior to contacting Quantum Customer Support.
Ports Description
FC 1 and FC 6 Displays the current status of the individual ports
on the quad port Fibre Channel HBA(s). These are
the Fibre Channel HBA(s) that connect the
controller to the storage arrays via the Fibre
Channel switch. The status can either be Up
(green) or Down (grey).
FC 2 through
FC 5
Displays the current status of the individual ports
on the dual port Fibre Channel HBA(s). These are
the Fibre Channel HBA(s) that connect the
controller to the customer Fibre Channel SAN.
The status can either be 1 Gigabit/2 Gigabit
(green) or Down (grey).