User's Guide

Chapter 3 DX-Series Remote Management
System Status
Quantum DX-Series User’s Guide 65
The storage bin details are shown in table 14.
Table 14 Storage Bin Details
Viewing Hardware Status 3 The DX-Series system provides a variety of hardware information from
the Hardware Status page. The Hardware Status page gives the current
status of the hard drives, power supplies, fan modules, and temperature
of the controller, Fibre Channel switch and storage arrays.
To view the hardware status:
1 From the System Status page, click Hardware tab to view the
hardware status.
The Hardware Status page displays (see figure 43):
Field Description
Status Displays the current status of the storage bin.
The status is either accessible or not accessible.
Contents Displays the current contents of a storage bin. If
a tape cartridge is present in a bin, the cartridge
label will display in the contents field as well as
the write protect status and capacity
information.
Compression
Information
Displays the compression ratio as well as the
uncompressed usage.