User's Guide

Chapter 3 DX-Series Remote Management
Configuration
Quantum DX-Series User’s Guide 51
Configuring the Date and
Time
3
The date and time can be set from the DX-Series system web pages.
Setting the correct date and time allows the DX-Series system to provide
accurate reports when events occur on the DX-Series system.
Configuring the Data and Time 3
To access the Date and Time Configuration page:
1 In the Configuration page, click Date & Time.
The management frame displays the Date & Time Configuration
page (see
figure 32).
Figure 32 Date and Time
Configuration
2 There are two options for setting the system date and time:
a Select Manual to manually set the system date and time using the
Change button for the system date and drop down boxes for the
system time.
b Select Use NTP (Network Time Protocol) to synchronize the
DX-Series system to an NTP server. The “Select a Server”
selection makes a list of well-known NTP servers such as the U.S.