User's Guide

Chapter 3 DX-Series Remote Management
Configuration
Quantum DX-Series User’s Guide 42
To add a partition:
1 From the Partition page, click Add to add a partition to the system.
The Add Partition page displays (see figure 25).
Figure 25 Adding a Partition
2 Enter a partition name that identifies it so it can be distinguished
from other partitions on the DX-Series system.
3 Select the inquiry identity to determine the inquiry string returned
from the DX-Series system. If you select ATL P1000, the DX-Series
appears as an ATL P1000 to the host and backup application. If you
Note: To add, edit, or delete a partition, the system must be offline.
Note: The partition name is independent of the host name in the
Network tab (see Configuring the Network on page 49).