User's Guide

Chapter 2 Basic Operations
DX-Series Fibre Channel Switch Operations
Quantum DX-Series User’s Guide 30
DX-Series Fibre Channel Switch Operations 2
This section describes how to monitor the DX-Series Fibre Channel
switch. The DX-Series Fibre Channel switch can be monitored through
the various LEDs located on the front and back of the unit. Refer to the
following section for descriptions of the component LEDs (see figure 18
):
Figure 18 Fibre Channel
Switch LED Locations




 





0/7%2 3934%-
4%-0
/.
&!5,4 &!5 ,4

28!#4 ,).+
Ethernet LEDs System LEDs Port LEDs
Power supply/fan LEDs Power supply/fan LEDs
The LEDs are described in table 9.
Table 9 Fibre Channel Switch
LED Descriptions
LED On/Flash/Off Description
Ethernet
LEDs- Green
Ethernet
Activity (left
port) Flashing
The Ethernet port is receiving data.
Ethernet Link
(left port) On
The switch is connected to an
operational Ethernet network.